how to do correct operation of the heat treatment process
Today heat treatment processing technology is the use of a wide range of industries are involved, of course, for processed products, it is good or bad is entirely safe operation by the controlled heat treatment processing:
1. Operation heat treatment processing, you must regularly inspect the equipment, tubing and air pipes shall not oil spills, leaks, there should not be heavy bottom.
2, should always pay attention to check the door open and close automatically disconnect device is good, and if the distribution cabinet lights work properly.
3, the operating heat processing should be noted that in the heat treatment processing operations may not place any metal objects on stage, in order to avoid a short circuit.
4, when the heat treatment process, paying particular attention to prevent the special gas leak caused by poisoning.
5, when the heat treatment processing operations, should pay special attention to prevent electric shock. Floor operations should be laid between the rubber pad, and pay attention to prevent leakage of cooling water spilled on the floor and elsewhere.
6, during the heat treatment process, should pay attention to take some cooling measures to quench tank temperature controlled at below 80 ℃.
Heat treatment was wantonly use, and therefore must be to understand the safe operation of the heat treatment process, so as to secure the use of heat treatment process.
